Voltage To Frequency Converter Range 10Hz To 11Khz Using LM331

The LM331 family of voltage-to-frequency converters are ideally suited for use in simple low-cost circuits for analog-to-digital conversion, precision frequency-to-voltage conversion, long-term integration, linear frequency modulation or demodulation, and many other functions. The output when used as a voltage-to-frequency converter is a pulse train at a frequency precisely proportional to the applied input voltage. Thus, it provides all the inherent advantages of the voltage-to-frequency conversion techniques, and is easy to apply in all standard voltage-to-frequency converter applications.

Further, the LMx31A attain a new high level of accuracy versus temperature which could only be attained with expensive voltage-to-frequency modules. Additionally the LMx31 are ideally suited for use in digital systems at low power supply voltages and can provide low-cost analog-to-digital conversion in microprocessor-controlled systems. And, the frequency from a battery-powered voltage-to-frequency converter can be easily channeled through a simple photo isolator to provide isolation against high common-mode levels.

The LMx31 uses a new temperature-compensated band-gap reference circuit, to provide excellent accuracy over the full operating temperature range, at power supplies as low as 4 V. The precision timer circuit has low bias currents without degrading the quick response necessary for 100-kHz voltage-to-frequency conversion. And the output are capable of driving 3 TTL loads, or a high-voltage output up to 40 V, yet is short-circuit-proof against VCC.

Features

  •     Ensured Linearity 0.01% Maximum
  •     Improved Performance in Existing Voltage-to-
  •     Frequency Conversion Applications
  •     Split or Single-Supply Operation
  •     Operates on Single 5-V Supply
  •     Pulse Output Compatible With All Logic Forms
  •     Excellent Temperature Stability: ±50 ppm/°C
  •     Maximum
  •     Low Power Consumption: 15 mW Typical at 15 V
  •     Wide Dynamic Range, 100 dB Minimum at 10-kHz
  •     Full Scale Frequency
  •     Wide Range of Full Scale Frequency:
  •     10 Hz to 11 kHz

 

voltage-to-frequency-converter-range-10hz-11khz-using-lm331-1

voltage-to-frequency-converter-range-10hz-11khz-using-lm331-2

Leave a Reply

Your email address will not be published. Required fields are marked *