RIAA PRE-AMPLIFIER USING THE NE5534

02/11/2016 RAJ SHARMA Leave a comment

The pre-amplifier for phono equalization, low frequency boost provided by the inductance of the magnetic cartridge with the RC network providing the necessary break points to approximate the theoretical RIAA curve.

riaa-pre-amplifier-using-ne5534

Audio

Car LED Head-Lamp Fade effect – arduino project

27/11/2020 RAJ SHARMA
3 Amps power operational amplifier using lm675

17/07/2019 RAJ SHARMA
Audio line receiver/Studio Grade 2-channel audio line receiver using ina1650

06/07/2019 RAJ SHARMA
Studio-Grade Fully Balanced Stereo Headphone Amplifier Using LME49600 and BA4560

26/06/2019 RAJ SHARMA

Circuits & Projects

Search for:

Sound To Light Effect Circuit

Electronics Work Bench

Window Comparator

LED DIMMER

PS2 Wireless Remote Robot Controller

Clap Switch with Timer

Who Won

Metal Detector Schematic

3 WHEEL ROBOT CHASSIS

RC SIGNAL MONITOR USING 20 SEGMENT BAR-GRAPH LED

RC SIGNAL MONITOR AND SWITCH

Mini Microphone Pre-Amplifier

1.6KW Brush=Less Motor Power Driver

Electret Micro-Phone Pre-Amplifier

Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes

18/02/2024 Leave a comment

ROHM has developed a zero-drift operational amplifier (op amp) – the LMR1002F-LB. It is designed for industrial and consumer electronics devices and minimizes both input

TMC2209 UART STEPPER DRIVER USING JOYSTICK ARDUINO

30/01/2024 Leave a comment

More Info……. https://forum.arduino.cc/t/tmcstepper-arduino-tmc2209/956036/8 Author mrExplore Download Arduino Code Watch Video Test is done with BIGTREETECH V1.3 Arduino Pins EN_PIN 2 // Enable – PURPLE DIR_PIN

Generating Two 180° Out of Phase 25 kHz Square Waves with dead time

29/01/2024 Leave a comment

Arduino Code Downloads Code Author John Wasser https://forum.arduino.cc/t/complementary-pwm-signals-at-50-khz-with-dead-time/1081473/4 Video Link

Generating Two 180 Out of Phase 50 kHz Square Waves with dead time

29/01/2024 Leave a comment

Download Arduino Code Code Credits to John Wasser https://forum.arduino.cc/t/complementary-pwm-signals-at-50-khz-with-dead-time/1081473/4 Video Link

B & Plus KK 2kW Output Wireless Chargers for AGVs/Mobility

14/10/2023 Leave a comment

B & Plus wireless chargers for AGVs/mobility features a high power output of 2kW that can supply power to high capacity batteries in electric golf

Accurate sensing designed for high-voltage systems

13/10/2023 Leave a comment

Why accurate and reliable high-voltage sensing is critical to the future of electrification Technology that measures temperature, current and voltage can help accelerate the transition

40-V, 16-Bit, I2C output digital power monitor

04/06/2023 Leave a comment

he INA700 is a digital power monitor with an integrated shunt resistor along with a 16- bit delta-sigma ADC specifically designed for current sensing applications.

Arduino UNO R4 , The family is getting bigger

16/04/2023 Leave a comment

The UNO R4 is powered by the Renesas RA4M1 32-bit Cortex®-M4 processor, providing a significant boost in processing power, memory, and functionality. The WiFi version comes

DDS Module AD9833 , Output 0 to 200KHz , Potentiometer and Arduino

15/09/2022 Leave a comment

Simple DDS module test Video Code and Connections

1600W Titanium server power supply with 600V CoolMOS G7 in DDPAK and digital control by XMC

05/07/2022 Leave a comment

This Infineon evaluation board (EVAL_1K6W_PSU_G7_DD) represents a complete system solution for a 1600W server power supply (PSU) which achieves the 80Plus® Titanium® standard. The power

RIAA PRE-AMPLIFIER USING THE NE5534

Related Posts

Leave a Reply Cancel reply