Circuit Ideas I Electronic DIY Projects I Robotics
This project has been designed around TLP250/352 which is Opto-Coupler IGBT/MOSFET Gate Driver from Toshiba and Mosfet IRFP260 from IR, This relay consists of optically isolated gate driver and low impedance Mosfet. The combination of low resistance and high load current handling capabilities make this Relay suitable for a variety of switching applications. These devices are ideally suited for controlling
Read moreThis simple circuit designed around Solid State Relay S216S02 from SHARP. The S216S02 solid State Relay (SSR) is an integration of an infrared emitting diode (IRED), a Phototraic Detector and a main output Traic. These devices are ideally suited for controlling high voltage AC loads with solid state reliability while providing 4KV isolation from input to output. A solid-state relay
Read moreThis is a large current Relay module with single pole double throw switch which provides normally closed and normally open operations. The Relay is the most common used module in application such as home automation, industrial automation, and machine on/off. Sometimes you need to control large current such as the fans, lights, water heaters, room heaters, Air-conditioning, vacuum pumps That
Read moreSingle Channel Relay Board is a simple and convenient way to interface a relay for switching application in your project. Input supply 12VDC @ 42 mA On Board 5V Regulator provides 5V output Output SPDT Relay Relay specification 5 A @ 230 VAC Trigger level 2 ~ 9 VDC Header connector for connecting
Read more8 Channel Relay Board is a simple and convenient way to interface 8 relays for switching application in your project. Input voltage level support TTL as well as CMOS. Easy interface with Micro-ontrollers based projects and analog circuits. Input supply 12 VDC @ 336 mA Output eight SPDT relay Relay specification 5 A @ 230 VAC Trigger level 2 ~
Read moreOpto-Isolated 4-Channel Triac Board (R) is used for fast switching applications. Ideal for switching mains circuits, lights, appliances and small load. Each circuit is effectively isolated with opto-isolators on each channel, TTL inputs control each channel. Trigger input 2-12 VDC Mains supply input 230 VAC or 110 VAC Output 1 A @ 230 VAC (RMS ON STATE CURRENT 4 AMPS
Read moreOpto-isolated 8-Channel Triac Board is used for fast switching applications. Ideal for switching mains circuits, lights, appliances and small load. Each circuit is effectively isolated with opto-isolators on each channel, TTL inputs control each channel. Trigger input 2 to 5 VDC, individual cathode and anode out Mains supply input 230 VAC or 110 VAC Output 100 W each Designed to
Read more8 Channel Relay Board is a simple and convenient way to interface 8 relays for switching application in your project. Input – 12 VDC @ 336 mA Output – eight SPDT relay Relay specification – 5 A @ 230 VAC Trigger level – 2 ~ 5 VDC Berg pins for connecting power and trigger voltage LED on each channel indicates
Read moreQuad Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project. Features Input supply 12 VDC @ 170 mA Output four SPDT relay Relay specification 5 A @ 230 VAC Trigger level 2 ~ 12 VDC Berg pins for connecting power and trigger voltage LED on each channel indicates relay status
Read more200W Lamp Flasher project is used to flash lamps, bulbs and halogen lamp to give your product that attracting look. Input supply – 6 ~ 12 VDC Output – upto 200 W lamp / bulb load Optically isolated Mains supply Onboard preset to adjust the frequency (speed) of flashing (1 Hz to 5 Hz) Power Battery Terminal (PBT) for easy
Read more