4 Channel Compact Relay Board Using SMD Components ULN2003

4 Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project. Very compact design can fit in small area, manly this board is made for low voltage application.

Features

  • Input supply 12 VDC @ 170 mA
  • Output four SPDT relay
  • Relay specification  10A/24V DC
  • Trigger level 2 ~ 5 VDC
  • Header Connector for connecting power and trigger voltage
  •  LED on each channel indicates relay status
  •  Power Battery Terminal (PBT) for easy relay output and aux power connection
  •  Four mounting holes of 3.2 mm each

 

Applications: Robotics, Electronics projects, Industrial controls, Microwaves Oven, Fans, DC Motor, AC Lamp, Solenoids Remote Controls etc.

 

Note: The board is designed for low voltage switching application, maximum supply at relay contacts 48V DC/7Amps

 

 

 

 

LM317-ADJ Resistor Value and Circuit for 3.3V,5V,12V,15V,18V

LM317-ADJ Resistor Value and Circuit for 3.3V,5V,12V,15V,18V

CALCULATION COURTESY  WWW.REUK.CO.UK

 

 

Sorted List of Output Voltages with R1 and R2

1.43V R1 = 470, R2 = 68
1.47V R1 = 470, R2 = 82
1.48V R1 = 370, R2 = 68
1.51V R1 = 330, R2 = 68
1.51V R1 = 390, R2 = 82
1.52V R1 = 470, R2 = 100
1.53V R1 = 370, R2 = 82
1.56V R1 = 330, R2 = 82
1.57V R1 = 270, R2 = 68
1.57V R1 = 470, R2 = 120
1.57V R1 = 390, R2 = 100
1.59V R1 = 370, R2 = 100
1.60V R1 = 240, R2 = 68
1.63V R1 = 330, R2 = 100
1.63V R1 = 270, R2 = 82
1.64V R1 = 390, R2 = 120
1.64V R1 = 220, R2 = 68
1.65V R1 = 470, R2 = 150
1.66V R1 = 370, R2 = 120
1.68V R1 = 240, R2 = 82
1.71V R1 = 330, R2 = 120
1.71V R1 = 270, R2 = 100
1.72V R1 = 220, R2 = 82
1.72V R1 = 180, R2 = 68
1.73V R1 = 470, R2 = 180
1.73V R1 = 390, R2 = 150
1.76V R1 = 370, R2 = 150
1.77V R1 = 240, R2 = 100
1.81V R1 = 270, R2 = 120
1.82V R1 = 150, R2 = 68
1.82V R1 = 330, R2 = 150
1.82V R1 = 180, R2 = 82
1.83V R1 = 390, R2 = 180
1.84V R1 = 470, R2 = 220
1.86V R1 = 370, R2 = 180
1.88V R1 = 240, R2 = 120
1.89V R1 = 470, R2 = 240
1.93V R1 = 330, R2 = 180
1.93V R1 = 150, R2 = 82
1.94V R1 = 270, R2 = 150
1.96V R1 = 390, R2 = 220
1.97V R1 = 470, R2 = 270
1.99V R1 = 370, R2 = 220
2.02V R1 = 390, R2 = 240
2.03V R1 = 240, R2 = 150
2.06V R1 = 370, R2 = 240
2.08V R1 = 330, R2 = 220
2.10V R1 = 220, R2 = 150
2.12V R1 = 390, R2 = 270
2.13V R1 = 470, R2 = 330
2.16V R1 = 330, R2 = 240
2.16V R1 = 370, R2 = 270
2.19V R1 = 240, R2 = 180
2.23V R1 = 470, R2 = 370
2.25V R1 = 150, R2 = 120
2.27V R1 = 270, R2 = 220
2.27V R1 = 330, R2 = 270
2.29V R1 = 470, R2 = 390
2.29V R1 = 180, R2 = 150
2.31V R1 = 390, R2 = 330
2.36V R1 = 270, R2 = 240
2.37V R1 = 370, R2 = 330
2.40V R1 = 240, R2 = 220
2.44V R1 = 390, R2 = 370
2.50V R1 = 470, R2 = 470
2.57V R1 = 370, R2 = 390
2.61V R1 = 220, R2 = 240
2.65V R1 = 330, R2 = 370
2.66V R1 = 240, R2 = 270
2.73V R1 = 330, R2 = 390
2.74V R1 = 470, R2 = 560
2.75V R1 = 150, R2 = 180
2.76V R1 = 390, R2 = 470
2.78V R1 = 270, R2 = 330
2.78V R1 = 220, R2 = 270
2.84V R1 = 370, R2 = 470
2.92V R1 = 180, R2 = 240
2.96V R1 = 270, R2 = 370
2.97V R1 = 240, R2 = 330
3.03V R1 = 330, R2 = 470
3.05V R1 = 390, R2 = 560
3.06V R1 = 270, R2 = 390
3.06V R1 = 470, R2 = 680
3.08V R1 = 150, R2 = 220
3.13V R1 = 220, R2 = 330
3.14V R1 = 370, R2 = 560
3.18V R1 = 240, R2 = 370
3.25V R1 = 150, R2 = 240
3.28V R1 = 240, R2 = 390
3.35V R1 = 220, R2 = 370
3.37V R1 = 330, R2 = 560
3.43V R1 = 270, R2 = 470
3.43V R1 = 390, R2 = 680
3.43V R1 = 470, R2 = 820
3.47V R1 = 220, R2 = 390
3.50V R1 = 150, R2 = 270
3.54V R1 = 180, R2 = 330
3.55V R1 = 370, R2 = 680
3.70V R1 = 240, R2 = 470
3.82V R1 = 180, R2 = 370
3.83V R1 = 330, R2 = 680
3.84V R1 = 270, R2 = 560
3.88V R1 = 390, R2 = 820
3.91V R1 = 470, R2 = 1000
3.92V R1 = 220, R2 = 470
3.96V R1 = 180, R2 = 390
4.00V R1 = 150, R2 = 330
4.02V R1 = 370, R2 = 820
4.17V R1 = 240, R2 = 560
4.33V R1 = 150, R2 = 370
4.36V R1 = 330, R2 = 820
4.40V R1 = 270, R2 = 680
4.43V R1 = 220, R2 = 560
4.44V R1 = 470, R2 = 1200
4.46V R1 = 390, R2 = 1000
4.50V R1 = 150, R2 = 390
4.51V R1 = 180, R2 = 470
4.63V R1 = 370, R2 = 1000
4.79V R1 = 240, R2 = 680
5.04V R1 = 330, R2 = 1000
5.05V R1 = 270, R2 = 820
5.10V R1 = 390, R2 = 1200
5.11V R1 = 220, R2 = 680
5.14V R1 = 180, R2 = 560
5.17V R1 = 150, R2 = 470
5.24V R1 = 470, R2 = 1500
5.30V R1 = 370, R2 = 1200
5.52V R1 = 240, R2 = 820
5.80V R1 = 330, R2 = 1200
5.88V R1 = 270, R2 = 1000
5.91V R1 = 220, R2 = 820
5.92V R1 = 150, R2 = 560
5.97V R1 = 180, R2 = 680
6.04V R1 = 470, R2 = 1800
6.06V R1 = 390, R2 = 1500
6.32V R1 = 370, R2 = 1500
6.46V R1 = 240, R2 = 1000
6.81V R1 = 270, R2 = 1200
6.92V R1 = 150, R2 = 680
6.93V R1 = 330, R2 = 1500
6.94V R1 = 180, R2 = 820
7.02V R1 = 390, R2 = 1800
7.10V R1 = 470, R2 = 2200
7.33V R1 = 370, R2 = 1800
7.50V R1 = 240, R2 = 1200
8.07V R1 = 330, R2 = 1800
8.08V R1 = 150, R2 = 820
8.19V R1 = 270, R2 = 1500
8.30V R1 = 390, R2 = 2200
8.43V R1 = 470, R2 = 2700
8.68V R1 = 370, R2 = 2200
9.06V R1 = 240, R2 = 1500
9.58V R1 = 330, R2 = 2200
9.77V R1 = 220, R2 = 1500
9.90V R1 = 390, R2 = 2700
10.03V R1 = 470, R2 = 3300
10.37V R1 = 370, R2 = 2700
10.63V R1 = 240, R2 = 1800
11.25V R1 = 150, R2 = 1200
11.44V R1 = 270, R2 = 2200
11.48V R1 = 330, R2 = 2700
11.67V R1 = 180, R2 = 1500
11.83V R1 = 390, R2 = 3300
12.40V R1 = 370, R2 = 3300
12.71V R1 = 240, R2 = 2200
13.75V R1 = 330, R2 = 3300
15.31V R1 = 240, R2 = 2700
16.25V R1 = 150, R2 = 1800
16.53V R1 = 270, R2 = 3300
16.59V R1 = 220, R2 = 2700
18.44V R1 = 240, R2 = 3300
19.58V R1 = 150, R2 = 2200
20.00V R1 = 220, R2 = 3300
23.75V R1 = 150, R2 = 2700
24.17V R1 = 180, R2 = 3300
28.75V R1 = 150, R2 = 3300

15V 350mA Symmetrical Regulated Power Supply Using On Board Transformer and LM7815 & LM7915 Regulators

15V 350mA Symmetrical Regulated Power Supply Using On Board Transformer and 7815-7915 Regulators (1)

Symmetric 15 VDC power supply been designed for audio applications, can power up microphone pre-amplifier, audio buffers, audio mixer, distributions amplifier, headphone amplifier, VU meter and lots of other op-amp based projects.

DOC

  • Mains supply input 240 VAC
  • Output +/- 15 VDC Dual, 350 mA
  • Regulated Low ripple DC output
  • Earth connection for chassis ground
  • Onboard regulator for stable supply
  • Dual output LED indication
  • Supply input & output via screw terminal connector
  • Dual unregulated output +/- 22 VDC via berg connector
  • Four mounting holes of 3.2 mm each
  • PCB Dimensions 117 mm x 46 mm

 

15V 350mA Symmetrical Regulated Power Supply Using On Board Transformer and 7815-7915 Regulators (2)

15V 350mA Symmetrical Regulated Power Supply Using On Board Transformer and 7815-7915 Regulators (1)

15V 350mA Symmetrical Regulated Power Supply Using On Board Transformer and 7815-7915 Regulators (3)

12V @ 350mA Output DC Regulated Power Supply Using On Board Transformer

12V 350mA Power Supply Using On Board Transformer (1)

High quality power supply to power up the Micro controller based projects.  PCB Mounted transformer, compact size, easy connection via screw terminal connector.  Designed for High end audio equipment.

DOC

  • Mains supply input 240 VAC
  • Output 12 VDC, 350 mA
  • Low ripple DC output
  • Onboard regulator for stable supply
  • Regulator required for peak current use
  • Onboard power indication LED
  • Supply input & output via screw terminal connector
  • Berg connector for Aux 12 VDC output
  • Unregulated supply 15 VDC via berg connector
  • Four mounting holes of 3.2 mm each
  • PCB Dimensions 96 mm x 41 mm

 

12V 350mA Power Supply Using On Board Transformer (2)

12V 350mA Power Supply Using On Board Transformer (1)

12V 350mA Power Supply Using On Board Transformer (3)

5V 1A Regulated Power Supply With On Board Transformer

5V 1A Regulated Power Supply with On Board Transformer (1)

High quality power supply to power up the Micro controller based projects.  PCB Mounted transformer, compact size, easy connection via screw terminal connector.  Can be use to run TTL based projects.

DOC

  • Mains supply input 240 VAC
  • Output 5 VDC, 1A (700 mA Ideal)
  • Low ripple DC output
  • Onboard regulator for stable supply
  • Regulator required for peak current use
  • Onboard power indication LED
  • Supply input & output via screw terminal connector
  • Berg connector for Aux 5 VDC output
  • Unregulated supply 9 VDC via berg connector
  • Four mounting holes of 3.2 mm each
  • PCB Dimensions 96 mm x 41 mm

 

5V 1A Regulated Power Supply with On Board Transformer (3) 5V 1A Regulated Power Supply with On Board Transformer (2) 5V 1A Regulated Power Supply with On Board Transformer (1)

12V & 5V Double Output Regulated DC Power Supply With On Board Transformer

5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (2) 5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (1)

This project can be used to power up TTL and CMOS based projects, it provides 5 VDC & 12 VDC outputs with an onboard mains transformer.  The project is based on the industry popular 7800 series voltage regulator in TO220 packages.

DOC

Features

  • Input: 240 VAC
  • Output: 5 V, 12 V @ 600 mA regulated low ripple DC voltage
  • Thermal overload/short circuit protection (provided by IC feature)
  • Power Battery Terminal (PBT) for easy input and output connection
  • External On/Off switch connection possible
  • LED indication for outputs
  • Four mounting holes of 3.2 mm each
  • PCB dimensions 87 mm x 49 mm

 

5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (4) 5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (4) 5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (3) 5V AND 12V 1A OUTPUT POWER SUPPLY WITH ONBOARD TRANSFORMER (1)

5V 500mA Regulated Linear Power Supply With On-Board Transformer

5V 500mA Regulated Liniar Power Supply with On Board Transformer (1)

This project is designed to provide 5 V @ 500 mA DC regulated supply with an onboard mains transformer.  This project is based on the famous 7805 voltage regulator in TO220 package.

DOC

  • Input : 240 VAC Or 120 VAC
  • Output : 5 V @ 500 mA regulated low ripple DC voltage
  • Thermal overload/short circuit protection (provided by IC feature)
  • Power Battery Terminal (PBT) for easy input and output connection
  • External On/Off switch connection possible
  • LED indication for output
  • Four mounting holes of 3.2 mm each
  • PCB Dimensions 72 mm x 40 mm

 

5V 500mA Regulated Liniar Power Supply with On Board Transformer (3) 5V 500mA Regulated Liniar Power Supply with On Board Transformer (2) 5V 500mA Regulated Liniar Power Supply with On Board Transformer (1)

1 2