BALANCED 4 CHANNEL AUDIO DISTRIBUTION AMPLIFIER Using BA4560 OP-AMP
Circuit described here is a four channel audio distribution amplifier. The input and all four outputs may be connected through the XLR jacks. The input accepts a balanced. Each of the four outputs provides line level balanced signal. On board Trimport provided to adjust the gain of each output channel and also Master gain adjust for input signal, Trim-pot can be replaced with 16mm Potententiometer, circuit required dual15 V DC supply (+/-15V DC). Circuit designed using low noise BA4560 Op-amp from ROHM.
Download PDF Document
- Supply +/-15V DC (Dual 15V DC)
- 4 Balanced Outputs Male XLR Connectors
- 1 Balanced Input Female XLR Connector
- 4 Trimmer-Pots (Output Gain Adjust)
- 1 Trimmer-Pot (Master Input Gain Adjust)
Low Noise Dual Supply Voltage Operational Amplifier – BA4560
General-purpose BA4560 op-amp is suitable for any audio applications due to low noise and low distortion characteristics and are usable for other many applications by wide operating supply voltage range. BA4560R is high-reliability products with extended operating temperature range and high ESD tolerance.