PWM 2 Amp Solenoid,Valve,Heater Driver Using DRV101

The DRV101 is a low-side power switch employing a pulse-width modulated (PWM) output. Its rugged design is optimized for driving electromechanical devices such as valves, solenoids, relays, actuators, and positioners.The DRV101 is also ideal for driving thermal devices such as heaters and lamps. PWM operation conserves power and reduces heat rise, resulting in higher reliability. In addition, adjustable PWM allows fine control of the power delivered to the load. Time from dc output to PWM output is externally adjustable. The DRV101 can be set to provide a strong initial closure, automatically switching to a soft hold mode for power savings. Duty cycle can be controlled by a resistor, analog voltage, or digital-to-analog converter for versatility. A flag output indicates thermal shutdown and over/under current limit. A wide supply range allows use with a variety of actuators. The DRV101 is available in a 7-lead staggered TO-220 package and a 7-lead surface-mount DDPAK plastic power package. It is specified over the extended industrial temperature range of –40°C to +85°C.

FEATURES

  • HIGH OUTPUT DRIVE: 2.3A
  • WIDE SUPPLY RANGE: 12-24V ( 9 to 60V Supply Possible Check data Sheet)
  • PWM 30% To 90%
  • PWM Output
  • Internal 24kHz Oscillator
  • Digital Control Input
  • Adjustable Delay and Duty Cycle
  • Over/Under Current Indicator
  • Fully Protected
  • Thermal Shutdown with Indicator
  • Internal Current Limit

Watch Video Of Solenoid Driver

 

APPLICATIONS

  • Electra-mechanical  drivers
  • Solenoids Positioners
  • Actuators High Power Relays/Contactors
  • Valves Clutch/Brake
  • FLUID AND GAS FLOW SYSTEMS
  • INDUSTRIAL CONTROL
  • FACTORY AUTOMATION
  • PART HANDLERS
  • PHOTOGRAPHIC PROCESSING
  • ELECTRICAL HEATERS

 

 

pwm-2a-solenoid-driver-using-drv101-1

pwm-2a-solenoid-driver-using-drv101-pcb

 

 


DRV101 APPLICATION FROM TI

pwm-2a-solenoid-driver-using-drv101-d

ISOLATED HIGH SIDE DRIVER CIRCUIT,  APPLICATION FROM TI

pwm-2a-solenoid-driver-using-drv101-2

DC MOTOR SPEED CONTROLLER USING AC TACHOMETER APPLICATION FROM TI

Leave a Reply

Your email address will not be published.